Diameters / Packaging
Diameters |
1 ea 14 stick Tube |
1 ea 24 stick Tube |
1 ea 28 stick Tube |
1 ea 51 stick Tube |
4 ea Tubes/Box |
5 ea 28 stick Tubes/Box |
25 lb Box |
---|---|---|---|---|---|---|---|
.050 in. x 1/8 in. | 0620FMPOP | ||||||
0.050 x 1/8 x 20 in | 0620F1,QS620F1 | 0620F15P | 0620F | ||||
0.050 x 1/8 x 36 in | 0636F,0H636F | ||||||
1/8 x 1/8 x 20 in | 0620S | ||||||
1/8 x 1/8 x 36 in | 0636S | ||||||
1/8 x 20 in | 0620R | ||||||
1/8 x 36 in | 0636R | ||||||
1/8" | 0620R1 | ||||||
1/16 x 20 in | 0320R1 | 0320R | |||||
1/16 x 36 in | 0336R,0H336R | ||||||
3/32 in. sq . | 0H536S | ||||||
3/32 x 3/32 x 36 in | 0536S | ||||||
3/32 x 20 in | 0520R | ||||||
3/32 x 36 in | 0536R,0H536R | ||||||
3/32" | 0520R1 |
DETAILS
Harris 0 is a low cost alloy that is suitable for most copper-to-copper or brass joints where close tolerance can be maintained.
Features
- Economical choice for copper brazing
- Copper is self-fluxing
- Alloy flows quickly at brazing temperature so requires close joint tolerance (less than 0.005")
- Primarily used in manual brazing applications
- Also a suitable for brazing brass
- Operators should avoid over heating the brass and use Stay Silv® white brazing flux
- Not recommended for brazing steel or other ferrous base metals
- Should not use Harris 0 if braze is exposed to sulfur or sulfur compounds in service
- Recommended joint clearance of .002"-.007"
- Conforms to the EU Reach & RoHS directive
Typical Applications
- Copper-to-copper joint brazing
- Brass joint brazing