ALBRAZE 1070 KIT
ALBRAZE 1070 KIT
ALBRAZE 1070 KIT
ALBRAZE 1070 KIT
ALBRAZE 1070 KIT
ALBRAZE 1070 KIT
ALBRAZE 1070 KIT

Al-Braze® 1070 Aluminum Brazing Alloy Kit

1070K

Al-Braze® 1070 cadmium-free aluminum brazing alloy kit with wire and flux

DETAILS

Al-Braze® 1070 is a cadmium-free aluminum-silicon brazing filler metal designed for flame brazing aluminum-to-aluminum. It is formulated to melt below the melting point of brazeable aluminum base metals and its narrow melting range provides rapid flow into the capillary. The kit includes 1/16 in. diameter wire and 1/3 oz. Al-Braze® EC brazing flux. Complies with the EU Reach & RoHS directive.

Features

  • Cadmium-free aluminum-silicon brazing alloy
  • Free-flowing with excellent capillary attraction due to its narrow melting range
  • Excellent ductility and penetration
  • Melts below the melting point of brazeable aluminum base metals
  • Excellent corrosion resistance
  • Ideal for joining aluminum-to-aluminum.
  • Not recommended for brazing aluminum directly to non-aluminum alloys as the joint may become brittle
  • Complies with the EU Reach & RoHS directive
  • The kit includes 1/16 in. (1.6 mm) 4047 aluminum brazing wire, 1/3 oz. (9.5 g) Al-Braze® EC brazing flux

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Warranty Information

  • 1 Year

What's Included

  • Al-Braze® 1070 aluminum brazing alloy kit: 1/16 in. (1.6 mm) 4047 aluminum brazing wire
  • 1/3 oz. (9.5 g) Al-Braze® EC brazing flux

Specifications

Consumables

Alloy Type Aluminum Brazing
Brazing Temperature Range 1080°F - 1120°F (582°C - 604°C)
Chemical Composition Silicon 12%
Aluminum 88%
Classification Wire: AWS A5.8 BAISi-4
ISO 17672 Al 112
ISO 17572 Al 112
Flux: Manufactured to Harris Products Group engineering standards
Diameter Kit - 1/16 in. (1.59 mm) wire
Liquidus 1080°F (582°C)
Material Aluminum
NSF Compliant No
Recommended Flux Al-Braze® EC flux. The flux is a powder and can be mixed with water to form a paste. Use a brush to apply paste flux to the assembly. It also can be sprinkled on the part. With this approach heat indirectly until flux liquefies. An alternate method is to heat the wire end with the flame and dip it into the flux powder. The flux will adhere to the heated wire and the flame can be used to melt flux from the wire onto the part.
RoHS Compliant Yes
Size 1 ea. jar
Solidus 1070°F (577°C)
Special Instructions Flux is hygroscopic and will absorb moisture. Keep container tightly closed.
Typical Application Flame brazing aluminum-to-aluminum

Warranty

Warranty 1 Year