DETAILS
Model 6290-VVCU is a high-speed oxy-propane/natural gas machine cutting tip with an unplated brass shell (0.088 cup depth). This tip maximizes kerf while increasing cutting speeds to reduce heat input. The tip produces high-quality cuts thus reducing afterwork. The 6290-VVCU tip is used with low-cost fuel gases.
Features
- Two-piece machine cutting tip
- Unplated brass outer shell with brass inner shell (.062 cup depth)
- For use with low cost alternate fuel gases - propane/natural gas (NOT FOR USE WITH ACETYLENE)
- Minimizes kerf
- Increased cutting speeds reduce heat input
- High quality cuts reduce afterwork
- Engraved with model number and tip size for easy identification
- One year manufacturer's warranty
Disclaimers
Warranty Information
- 1 Year
What's Included
- Model 6290-0VVCU Machine Cutting Tip
Specifications
Equipment
| Compatible Torch Model Number | 98-6E 98-6F |
| Construction | Two-piece - Copper and Brass |
| Cutting Oxygen Consumption SCFH | 125 |
| Cutting Oxygen PSIG | 90 |
| Cutting Speed (IPM) | 15 |
| Gas / Gas Service | Natural Gas Propane |
| Kerf (Approx.) in. | 0.08 |
| Low Preheat Oxygen Consumption SCFH | 35 |
| Material Thickness | 3/4 in. (19.1mm) |
| Natural Gas Consumption SCFH | 18 |
| Preheat Fuel Gas PSIG | 4 oz. - 2 lbs. |
| Preheat Oxygen PSIG - High Pressure | 35 |
| Preheat Oxygen PSIG - Low Pressure | 10 |
| Propane Consumption SCFH | 7 |
| Recommended Items/Accessories | Deluxe Two-Piece Tip Cleaner - Model E-9 - PN 9000160 |
| Special Instructions | Use next size larger tip with same PSIG for contour or intricate cutting For thin plate cutting use a highly carburizing preheat flame Cutting oxygen pressures should be measured at torch entry When using two hose machine torches, set oxygen pressure at cutting oxygen PSIG |
| Style | Machine cutting |
| Tip Size / Number | 0 |
| Typical Application | Machine cutting Demolition Fabrication Maintenance Shipbuilding |
Warranty
| Warranty | 1 Year |